Tear Off and Install a Flat Roof
Tear Off and Install a Flat Roof
Introduction
When it’s time to replace a flat roof, the process involves a complete tear-off of the existing material and installing a new, durable roofing system. This ensures long-term protection against weather conditions, improves energy efficiency, and enhances the structural integrity of the building. In this guide, we’ll cover the step-by-step process of tearing off and installing a flat roof, the materials involved, and important considerations to keep in mind.
As a trusted roofing contractor in Denver, CO, since 1978, Ernie’s Roofing provides high-quality flat roof replacements with professional craftsmanship. Contact us at 720-346-ROOF or visit Ernie’s Roofing for expert roofing services.
1. Assessing the Roof Condition
Before starting a flat roof tear-off, a thorough inspection is necessary to determine the extent of damage, leaks, or structural weaknesses. Key aspects to check include:
- Ponding water: Flat roofs often accumulate water due to poor drainage.
- Blisters and cracks: These indicate aging and potential leaks.
- Insulation condition: Damaged insulation can lead to heat loss and moisture issues.
Pro Tip: If your roof has extensive water damage or multiple leaks, a full tear-off is the best solution.
2. Preparing for Tear-Off
Preparation ensures a smooth and safe removal of the old roof. Steps include:
- Obtaining necessary permits as required by Denver building codes.
- Setting up safety measures like harnesses and guardrails.
- Protecting surrounding areas from falling debris.
- Arranging for proper waste disposal, such as using a dumpster.
3. Tearing Off the Old Roof
The tear-off process involves:
- Removing surface materials: This includes gravel, membranes, or old coatings.
- Lifting and stripping away layers: Using roofing shovels or cutters, old roofing materials are removed.
- Clearing debris: Ensuring a clean work area to prevent hazards.
Note: Some older flat roofs may contain asbestos. If so, professional removal is required.
4. Inspecting the Roof Deck
Once the old material is removed, the roof deck must be inspected for:
- Rotting or damaged wood
- Structural integrity issues
- Moisture damage
If any sections of the deck are compromised, they must be replaced before proceeding with the new installation.
5. Choosing the Right Flat Roofing Material
The choice of roofing material depends on budget, climate, and durability needs. Common options include:
- TPO (Thermoplastic Olefin) – Energy-efficient and UV-resistant.
- EPDM (Ethylene Propylene Diene Monomer) – Durable and flexible.
- Modified Bitumen – Asphalt-based and highly weather-resistant.
- PVC (Polyvinyl Chloride) – Strong, chemical-resistant, and long-lasting.
Pro Tip: TPO is a great choice for Denver’s climate due to its energy efficiency and durability.
6. Installing the New Roofing System
The installation process includes:
- Laying a vapor barrier to prevent moisture issues.
- Installing insulation for better energy efficiency.
- Applying the chosen roofing material using adhesives, fasteners, or heat welding.
- Securing seams and edges to prevent leaks.
7. Sealing and Waterproofing
Proper sealing ensures long-lasting protection from water infiltration. Steps include:
- Using seam tape or heat welding (for TPO and PVC roofs).
- Applying flashing around vents, pipes, and edges.
- Coating with reflective sealants to extend the roof’s lifespan.
8. Final Inspections and Cleanup
Once the roof is installed, a thorough inspection ensures everything is secure and meets building codes. Steps include:
- Checking for proper drainage and slope.
- Inspecting all seams, edges, and flashing.
- Cleaning up the worksite and disposing of waste materials responsibly.
9. Maintenance Tips for Longevity
To keep your flat roof in top shape:
- Schedule annual inspections.
- Keep drains and gutters clear.
- Address small leaks immediately.
- Apply reflective coatings to reduce UV damage.
Need a Flat Roof Replacement? Contact Ernie’s Roofing at 720-346-ROOF or visit our website.
10. Frequently Asked Questions (FAQs)
1. How long does it take to tear off and install a flat roof?
Depending on the size and complexity, it usually takes 3 to 5 days.
2. How much does a flat roof replacement cost?
Costs vary based on materials and labor but typically range between $5 to $10 per square foot.
3. Can I install a new flat roof over the old one?
In some cases, yes, but a full tear-off is recommended to prevent hidden moisture issues.
4. What’s the best flat roofing material for Denver’s climate?
TPO and EPDM are excellent choices due to their durability and energy efficiency.
5. How often should a flat roof be inspected?
At least twice a year, preferably in spring and fall.
6. Can a flat roof support solar panels?
Yes, but it must be structurally sound and properly reinforced.
7. How do I prevent ponding water on my flat roof?
Ensure proper drainage systems and install tapered insulation for slight slopes.
8. How long does a flat roof last?
With proper maintenance, TPO and PVC can last 20-30 years, while EPDM lasts 25-35 years.
9. What are the signs that my flat roof needs replacement?
Leaks, blisters, ponding water, and visible membrane damage indicate it’s time for a new roof.
10. Does Ernie’s Roofing offer flat roof installation in Denver?
Yes! We specialize in flat roof tear-offs and installations in Denver and surrounding areas. Call 720-346-ROOF for a free estimate.
For professional flat roof replacement in Denver, trust Ernie’s Roofing – serving the area since 1978! Visit erniesroofing.com or call 720-346-ROOF today!
OUR SERVICES
Your Neighborhood Roofing Contractor
Get more information concerning our service, do not wait to call us at 720 346 ROOF today. We’ll be more than happy to schedule a meeting with you.
Residential Roofing Contractor
Ernie’s Roofing specialize in residential roofing in Denver and have a team of experienced professional Roofers available to help you get the job done right The First Time. From minor repairs and maintenance to full–scale roof replacements,
Commercial Roofing
We construct, repair, as well as maintain Commercial Roofing systems for services both large and also small, creating personalized services that conserve our client’s time, cash, and also power. Call us at 720 346 ROOF and book a consultation today.
Hail Damage
Their knowledgeable staff is ready to help you assess the damage caused by storms and provide you with a comprehensive repair evaluation & plan. We specialize in all types of roof damage, including hail, wind, and even lightning strikes. Hail Claim Help
INSURANCE CLAIMS HELP
Our team of experienced insurance claim specialists will work with you to ensure that the insurance claim process is as stress-free as possible. We will work with your insurance company to provide all necessary documentation and estimates to ensure that your claim is processed quickly and correctly.
Wind Damage
When it comes to roof damage, it can be difficult to determine whether the damage was caused by hail or wind. While both types of damage can cause similar symptoms, they have different causes and require different repair methods.
What’s New on The Blog
How to Read Roofing Estimates
How to Read Roofing EstimatesLatest News & Resources When you need a roof contractor you can rely on the team of experts at Ernie's Roofing. We specialize in a wide range of services from new construction, maintenance, and repairs for your home or business.How to...
How To: Tarp a Roof in Denver
Tarp a Roof in DenverLatest News & Resources When you need a roof contractor you can rely on the team of experts at Ernie's Roofing. We specialize in a wide range of services from new construction, maintenance, and repairs for your home or business.How To: Tarp a...
How To: Replace a Roof Shingle in Denver
Replace a Roof Shingle in DenverLatest News & Resources When you need a roof contractor you can rely on the team of experts at Ernie's Roofing. We specialize in a wide range of services from new construction, maintenance, and repairs for your home or business.How...
#1 Rated Roofing Contrator In Denver
Craftsmanship That Stands Like a House
Let’s Get Your Project on the Right Track
Let’s Get Started